Find your SHAI fit
Our Signature Heavyweight Hoodie, Stamped Gloss Puffer and Plain Gloss Puffer are being prepared in S, M, L, XL and XXL.
Signature Heavyweight Hoodie — Large sample
| Measurement | Size L · inches | Size L · cm |
|---|---|---|
| Body length | 28.5 | 72.4 |
| Chest width · flat | 24 | 61.0 |
| Hem width · flat | 20 | 50.8 |
| Sleeve length | 24 | 61.0 |
| Cuff width · flat | 4 | 10.2 |
| Shoulder width | 24 | 61.0 |
Measured size L sample. Chest, hem and cuff are measured flat, not around the garment. A 24-inch flat chest is approximately 48 inches (121.9 cm) around the garment. These are garment measurements, not body measurements. Centimetres are converted from the supplied inches and rounded to one decimal. Measurements for S, M, XL and XXL and the production measurement tolerance are awaiting factory confirmation.
Puffers — measurements pending
The Stamped Gloss Puffer and Plain Gloss Puffer have separate material constructions. Their finished S–XXL measurement charts will be added when the factory confirms them. Do not use the hoodie chart to size a puffer.
How to compare your fit
- Choose a similar hoodie or jacket that fits you comfortably. For a puffer, consider the layers you intend to wear underneath.
- Lay it flat, close its fastenings and smooth it without stretching.
- Measure chest width straight across, underarm to underarm. This is a flat garment width, not a body chest measurement.
- Measure body length from the high shoulder point beside the neck to the hem.
- Measure shoulder width from shoulder seam to shoulder seam, then sleeve length from the shoulder seam to the cuff.
- Compare like-for-like with the measurement method stated on the SHAI chart. If a sleeve is measured differently, ask us before comparing.
Between sizes?
Check both chest room and body/sleeve length. A size label alone does not determine fit. Contact SHAI Customer Care if you need help once the chart is available.